中華人民共和國國家標準(中國大陸GB標準)英文版 |
 |
GB標準是中華人民共和國國家標準，也叫GB國標，是中國大陸強制執行的國家標準，所有中國大陸境內銷售的商品及提供服務都必須符合GB國家標準的要求，包括進口商品及服務； 本網站提供GB國家標準的查詢檢索，英文版翻譯，GB標準產品檢測檢驗及合規性分析服務； |
|
GB 18279-2023 医疗保健产品灭菌 环氧乙烷 医疗器械灭菌过程的开发、确认和常规控制要求（中英文版） Sterilization of healthcare products Ethylene oxide Requirements for the development, validation and routine control of medical device sterilization processes |
 |
|
|
|
YY 0970-2023 医疗保健产品灭菌 一次性使用动物源性医疗器械的液体化学灭菌剂 医疗器械灭菌过程的特征、开发、确认和常规控制的要求（中英文版） Sterilization of healthcare products - Liquid chemical sterilants for single-use medical devices of animal origin - Requirements for the characterization, development, validation and routine control of medical device sterilization processes |
|
|
|
|
YD/T 4432.4-2023 域间源地址验证（SAVA-X）技术要求 第4部分：地址域的创建、选择和注册指南（中英文版） Source Address Validation Between Domains (SAVA-X) Technical Requirements Part 4: Guidelines for the Creation, Selection, and Registration of Address Domains |
|
|
|
|
GB/Z 42217-2022 医疗器械 用于医疗器械质量体系软件的确认（中英文版） Medical devices for the validation of medical device quality system software |
|
|
|
|
YY/T 1464-2022 医疗保健产品灭菌 低温蒸汽甲醛 医疗器械灭菌过程的开发、确认和常规控制要求（中英文版） Sterilization of healthcare products - Low temperature steam formaldehyde - Requirements for the development, validation and routine control of medical device sterilization processes |
|
|
|
|
RB/T 063-2021 检验检测机构管理和技术能力评价 方法的验证和确认要求（中英文版） Verification and validation requirements for the management and technical capability evaluation methods of inspection and testing institutions{译} |
|
|
|
|
GB/T 39468-2020 陆地定量遥感产品真实性检验通用方法（中英文版） General methods for the validation of terrestrial quantitative remote sensing products |
|
|
|
|
GB/T 19974-2018 医疗保健产品灭菌 灭菌因子的特性及医疗器械灭菌过程的开发、确认和常规控制的通用要求（中英文版） Sterilization of health care products—General requirement for characterization of a sterilization agent and the development,validation and routine control of a sterilization process for medical devices |
|
|
|
|
GB/T 19973.2-2018 医疗器械的灭菌 微生物学方法 第2部分：用于灭菌过程的定义、确认和维护的无菌试验（中英文版） Sterilization of medical devices—Microbiological methods—Part 2: Tests of sterility performed in the definition，validation and maintenance of a sterilization process |
|
|
|
|
GB/T 32591-2016 轨道交通 受流系统 受电弓与接触网动态相互作用仿真的验证（中英文版） Railway applications—Current collection systems—Validation of simulation of the dynamic interaction between pantograph and overhead contact line |
|
|
|
|
GB/T 32592-2016 轨道交通 受流系统 受电弓与接触网动态相互作用测量的要求和验证（中英文版） Railway applications—Current collection systems—Requirements for and validation of measurements of the dynamic interaction between pantograph and overhead contact line |
|
|
|
|
GB 18278.1-2015 医疗保健产品灭菌 湿热 第1部分：医疗器械灭菌过程的开发、确认和常规控制要求（中英文版） Sterilization of health care products—Moist heat—Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices |
|
|
|
|
GB/T 21223.2-2015 老化试验数据统计分析导则 第2部分：截尾正态分布数据统计分析的验证程序（中英文版） Guide for the statistical analysis of ageing test data—Part 2: Validation of procedures for statistical analysis of censored normally distributed data |
|
|
|
|
GB/T 27761-2011 热重分析仪失重和剩余量的试验方法（中英文版） Standard test method of mass loss and residue measurement validation of thermogravimetric analyzers |
|
|
|
|
GB/T 27752-2011 铀、钚和重铬酸钾标准溶液浓度的确认（中英文版） Validation of the strength of uranium reference solution, plutonium reference solution and potassium dichromate reference solution |
|
|
|
|
GB/T 19973.2-2005 医用器材的灭菌 微生物学方法 第二部分：确认灭菌过程的无菌试验（中英文版） Sterilization of medical devices -- Microbiological methods -- Part 2: Test of sterility performed in the validation of a sterilization process |
|
|
|
|
GB/T 19974-2005 医疗保健产品灭菌 灭菌因子的特性及医疗器械灭菌工艺的设定、确认和常规控制的通用要求（中英文版） Sterilization of health care products -- General requirement for characterization of a sterilizing agent and the development ,validation and routine control of a sterilization process for medical devices |
|
| 找到:17條目 | [首頁]-[上一頁]-[下一頁]-[尾頁] | 去到: 1 |
